Textured Polygons; Sound Settings; Master Sound Volume/Switch; Voice Guidance Volume/Switch - Navfly N29050-V1 User Manual

Note: You can only disable street names and POI icons if NAVFLY Navigator follows
your position. As soon as you move the map and Lock-to-Position (4.5.4) is disabled,
street names and icons become visible again. Press Enter or tap Lock to re-enable
Lock-to-Position and have the labels and icons disappear again.

5.2.5 Textured Polygons

Enable textured polygons, and have rivers, lakes, forests and other large objects
displayed in a more realistic and attractive way on the map. Disabling it will lead to
uniform areas but better performance. See 4.4.5.

5.3 Sound settings

Settings on this page determine the way NAVFLY Navigator sounds.

5.3.1 Master sound volume/switch

The loudness of NAVFLY Navigator is independent of your PND settings. When you
run NAVFLY Navigator, the position of this fader determines the device volume level.
When you exit the program, the device settings return.
The left part of this control works as a mute button. Tap to mute all NAVFLY
Navigator sounds. This works in tandem with the Mute button (4.5.11) on the map
screens. Switching one of them will change the status of the other.

5.3.2 Voice guidance volume/switch

The switch on the left can turn on or mute NAVFLY Navigator's audible guidance.
When turned on, the slider on the right will adjust the loudness of voice prompts. In
its leftmost position the voice guidance is suppressed, in its rightmost position the
master volume applies.
61