Emerson EC313D Owner's Manual page 9

- REAR VIEW -
ANT.
26
7 F.FWD button– Press to rapidly advance the tape,
or to view the picture rapidly in forward during
playback mode. (Forward Search)
B button–
•
When setting program (for example: setting clock
or timer program), press to determine your selec-
tion and proceed to the next step you want to
input.
•
Press to determine setting modes from on screen
menu.
•
Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET UP)
8 REC button– Press for manual recording.
Activates One Touch Recording.
OTR button–
(only on the TV/VCR)
9 Flashes during recording.
RECORD indicator–
Lights up in the Stand-by mode for Timer
Recording.
10 Remote Sensor Window–
signals from the remote control.
11
CHANNEL K / L buttons–
desired channels for viewing or recording.
You may display the main menu on the TV screen
by pressing repeatedly this button on the
TV/VCR.
TRACKING function– Press to minimize video
'noise' (lines or dots on screen) during playback
mode. (See page 21.)
12
VOLUME X X / Y Y buttons–
level.
13 POWER button– Press to turn TV/VCR on and
off. Press to activate timer recording.
14
Cassette compartment
15 Press to select desired channels
Number buttons–
for viewing or recording. To select channels from
1 to 9, first press the 0 button and then 1 to 9.
16
17
18
19
20
21
Receives the infrared
22
Press to select the
23
24
Adjust the volume
25
26
27
28
- 9 -
DC 13.2V
AC 120V
27 28
+100 button– When selecting cable channels
which are higher than 99, press this button first,
then press the last two digits. (To select channel
125, first press the "+100" button then press "2"
and "5").
Press to display the main menu on
MENU button–
the TV screen.
DISPLAY button– Display the counter or the cur-
rent channel number and current time on the TV
screen. (See page 16.)
Press to choose the desired
SPEED button–
recording speed:SP/SLP.
T-PROG. CLEAR button–
ting of timer program. (See page 27.)
COUNTER RESET button–
to 0:00:00.
Sets the game mode and external
GAME button–
input mode at the same time. (See page 17.)
TIME SEARCH button– Press to activate Time
Search mode.
PAUSE/STILL button– Press to temporarily stop
the tape during the recording or to view a still pic-
ture during playback.
Mutes the sound. Press it again to
MUTE button–
resume sound.
CHANNEL RETURN button–
the previously viewed channel. For example,
pressing this button once will change channel dis-
play from 3 (present channel) to 10 (previously
viewed channel), and pressing it a second time
will return from 10 to 3.
WAKE-UP/SLEEP button–
Sleep Timer. (See page 28 and 29.)
ANT. terminal– Connect to an antenna or cable
system.
Connect to the Car Battery Cord.
DC 13.2V jack–
Connect to the AC cord.
AC 120V jack–
Press to cancel a set-
Press to reset counter
Press to go back to
Sets the Wake up or
EN
0B19