Table of Contents
Advertisement
Step 6: Test Intel vPro Client Functionality
After the device has been discovered and added to the management database, it is a good idea to test
the functionality of the Intel vPro machine. Perform the following steps to test the Intel AMT client
functionality.
Step 6a: Test Intel vPro Client Functionality From LANDesk
1. In the All Devices list, right-click an Intel vPro device to display the menu of Intel AMT Options.
2. At a minimum, look at the following Intel vPro Options to test that the Intel AMT configuration
has been successfully completed:
Intel vPro Summary
o
Remote Boot Manager – Power On/Off
o
Remote Boot Manager using Console Redirection (Serial over LAN /SOL) and IDE
o
Redirection
For further information on testing these features, refer to the following whitepaper:
•
Integrating Intel® vPro™ Technology with LANDesk® Management Products
http://download.intel.com/business/vpro/pdfs/landesk_whitepaper.pdf
Step 6b: Test Intel AMT Client Functionality Using Intel AMT Web Console
1. On the management console system, login as an administrator with user rights.
2. Open a web browser and enter the IP address and assigned port number (16992 for non-TLS,
16993 for TLS) in the browser address bar (example, http://192.168.0.1:16992 or
http://192.168.0.1:16993 ).
The following web browsers are supported:
Internet Explorer* 6.0 SP1 or later
o
Netscape* 7.2 for Windows and Linux
o
Mozilla Firefox* 1.0 for Windows and Linux
o
Mozilla 1.7 for Windows and Linux
o
3. Once the Intel AMT Configuration Web Page is displayed, login using the Intel MEBx username
and password. You can then view the following client management information:
System Status
o
Hardware Information
o
Event Log
o
Remote Control
o
Intel® vPro™ and Intel® Centrino® Pro Processor Technology Quick Start Guide
28
Advertisement
Table of Contents
