Whirlpool Washing Machine User Manual page 7

Pouring in the detergents and additives
The dispenser will have three (models "B1" or "B2") or four (model
"A") chambers depending on model.
Chamber
• Detergent for the prewash
Chamber
• Detergent for the main wash
• Stain remover
• Water softener (water hardness 4)
When using liquid detergent, remove the coloured insert from the
detergent container and insert it in the first gap in
chamber . The scale on the insert makes dosing easier.
Chamber
• Fabric Softener
• Liquid starch
Only pour additives in up to the "Max" mark.
Chamber
• Chlorine bleach
No more than to the "Max" mark (four chambers model "A")
Notes:
• Keep detergents and additives in a safe, dry place out of the reach of children.
• Liquid detergents can be used for programmes with prewash. In this case only measure in a powder
detergent for the main wash.
• To prevent dispensing problems when using highly concentrated powder and liquid detergents, use
the special detergent ball or bag supplied with the detergent and place it directly inside the drum.
• When using descaling agents, bleaches or dyes, make sure that they are suitable for washing
machines. Descalers could contain components that can attack parts of your washing machine.
• Do not use any solvents in the washing machine (e. g. turpentine, benzine).
• If you use starch powder, proceed as follows:
1. Wash your laundry using the desired wash programme.
2. Then stir the starch in with water in a beaker.
3. Select the "Rinse and Spin" programme, reduce the speed to ca. 800 rpm and start the programme.
4. Pull out the detergent drawer until you can see about 3 cm of chamber
5. Pour the starch solution into chamber
6. If there are starch residues in the detergent drawer when the programme has finished, clean it if
necessary (see "Cleaning and Maintenance").
Take note also of the starch manufacturer's information.
24
while the water is running into the detergent drawer.
A
B1
B2
B2
.