Operation; Loading Discs - Philips DVD Video Player Manual

Operation

ZOOM DNM
ANGLE
VOL CH

Loading discs

DNM STOP PLAY
1 Press OPEN/CLOSE on the front of the player. The disc-loading
tray opens.
OPEN/CLOSE
2 Lay your chosen disc in the tray, label side up (also when a double
sided DVD disc is inserted). Make sure it is sitting properly in the
correct recess.
3 Gently push the tray, or press OPEN/CLOSE, to close the tray.
player display and playback starts automatically.
Note: If 'Disc Lock' is set to ON and the disc inserted is not in the 'child safe'
list (not authorized), the PIN code must be entered and/or the disc has to be
authorized. (see 'Access Control')
Digital Natural Motion (DNM)
Your DVD1010 has a new feature known as Digital Natural Motion
which makes use of advanced motional-correction techniques to
automatically smooth movements (a fast moving football for example) in
the picture. This features works both on discs containing PAL or NTSC
to give a truly natural impression of movement that is far more relaxing
on your eyes.
To check whether Digital Natural Motion is switched on or off,
briefly press the DNM button on the remote control or front panel
of the DVD player.
5 seconds.
To change the DNM status of your player, keep the DNM button
pressed for 1.5 seconds. Alternatively press the button again before
the display disappears from the screen.
Note: The Digital Natural Motion feature of your player is available only
through the Scart and YUV connections.
Video Mode
Video Mode (not for CVBS and S-Video)
Your player has a new feature known as Active Control. With Active
Control switched on, the player continuously monitors and corrects the
signal coming from the DVD-Video disc to ensure you always have the
best possible picture, and that all discs you play have the same
appearance.
To check whether Active Control is switched on or off, briefly
TV DVD press the VIDEO MODE button.
POWER POWER
VIDEO MODE
STOP PLAY
5 seconds.
REVERSE PAUSE SLOW FORWARD
To change the Active Control status of your player, keep the
PREVIOUS RESUME NEXT
VIDEO MODE button pressed for 1.5 seconds. Alternatively press
the button again before the display disappears from the screen.
READING appears in the status window and READ on the
'DNM ON' or 'DNM OFF' will then be displayed on screen for
'AC ON' or 'AC OFF' will then be displayed on screen for
OPERATION 31