Switching On; Virgin Mode - Philips DVD Video Player Manual

Switching on

1 Switch on the TV and select the video input for your DVD-Video
player.
VIDEO
ON/OFF 2 Press POWER ON/OFF.
appears.
The 'Virgin Mode' will only occur after the very first start up of the
player. In 'Virgin Mode' you may have to set your personal preferences
for some of the player's most relevant items. See 'Virgin Mode' in the
following.

Virgin Mode

General
In 'Virgin Mode' you may have to set your preferences for some of the
player's features.
Manual operation
After switching on the player for the very first time, the 'Virgin Mode
Screen' will appear (see 'Switching On').
The menu for the first item to be set is displayed and the first option is
highlighted.
Use the w v keys to go through the options in the menu. The icon
of the selected option will be highlighted.
Press OK to confirm your selection and to select the next menu.
PREVIOUS RESUME NEXT
Automatic setting
When settings can be taken over from your TV or Home Cinema
system, the message 'Auto configuring in process' will appear.
ZOOM DNM
Menus for which no settings are available will be displayed. They have to
ANGLE
VOL CH
be set manually.
Note: Preferences have to be set in the order in which the item menus will
appear on the screen.
The 'Virgin Mode' will only be cancelled after the settings for the last item
have been confirmed.
If any other keys than w v or OK are pressed,
screen.
If the player is switched off while setting personal preferences, all preferences
will have to be set again after switching the player on again.
The player display lights up and the 'Virgin Mode Screen'
will appear on the
PREPARATION 23