Connect To Optional Equipment - Philips DVD Video Player Manual

8 7 6
DIGITAL AUDIO OUT STEREO OUT
PCM - MPEG2 - DOLBY DIGITAL - DTS
LEFT
MAINS RIGHT
OUT OUT OUT ANALOG
OPTICAL OPTICAL COAX
Digital output
Analog output
Night mode
Karaoke vocal
18 PREPARATION

Connect to optional equipment

Connecting to an amplifier equipped with two channel
analog stereo
Connect the audio Left and Right output sockets to the
corresponding sockets on your amplifier, receiver or stereo system.
For this use the audio cable (6) supplied.
Connecting to an amplifier equipped with two channel
digital stereo (PCM)
1 Connect the player's digital audio output (optical 8 or coaxial 7) to
the corresponding input on your amplifier. For this use an optional
digital (optical 8 or coaxial 7) audio cable.
2 You will need to activate the player's digital output (see 'Personal
Preferences').
Connecting to an A/V receiver with multi-channel
decoder (Dolby Digital, MPEG 2 and DTS)
II Y
AUX-VCR
C
B
I
C
R
TV-OUT
Digital multi-channel sound
(CVBS) (Y/C) (Y-Cr-Cb)
VIDEO OUT S-VIDEO OUT VIDEO OUT
The digital multi-channel connection provides the optimum sound
quality. For this you need a multi-channel A/V receiver that supports
one or more of the audio formats supported by your DVD player
(MPEG 2, Dolby Digital and DTS). Check the receiver manual and the
logos on the front of the receiver to find out if your receiver supports
one of these formats.
1 Connect the player's digital audio output (optical 8 or coaxial 7) to
the corresponding input on the receiver using an optional digital
(optical 8 or coaxial 7) audio cable.
2 You will need to activate the player's digital output (see 'Personal
Preferences').
Note: If the audio format of the digital output does not match the capabilities
off no off
of your receiver, the receiver will produce a strong, distorted sound. The audio
Off format of the DVD disc in play is displayed in the Status Window when
PMC only
changing the language.
All
6-Channel Digital Surround Sound via digital connection can only be obtained
if your receiver is equipped with a digital multi-channel decoder.