Fts (Favourite Track Selection) - Audio Cd Only - Philips SACD Player Manual

Shuffle
G Press SHUFFLE during play.
➤ The order of the tracks is changed.
G To return to normal play, press SHUFFLE again.
Repeat track/disc
G To repeat the currently playing track, press
REPEAT.
➤
appears on the display.
REPEAT TRACK
G To repeat the entire disc, press REPEAT a second
time.
➤
appears on the display.
REPEAT ALL
G To exit Repeat mode, press REPEAT a third time.
Repeat A-B
To repeat or loop a sequence:
G Press REPEAT A-B at your chosen starting point.
➤
appears on the player display.
A
G Press REPEAT A-B again at your chosen end
point.
➤
- appears on the display, and the repeat
A B
sequence begins.
G To exit the sequence, press REPEAT A-B again.
Scan
Plays the first 10 seconds of each track on the disc.
G Press SCAN.
G To continue play at your chosen track, press SCAN
again or press 2 PLAY.
FTS (Favourite Track Selection)
- Audio CD only
- The FTS feature allows you to store your favourite
tracks for a particular disc in the player memory.
- Each FTS program can contain 20 tracks.
- Each time an FTS program is played it will be placed on
top of the list. When the list is full and a new program is
added, the last program in the list will be removed from
the list.
- The selections can be called up and played at any time.
- For storing an FTS program On Screen Display
operation is required.
-
24 OPERATION AUDIO
Storing an FTS-program
1 Load a disc and go to Stop mode.
CD
stereo track
stop
stop
fts On Off
track 1 2 3 4 5 6 7 8
program
Clear all
2 Use w (down cursor) to go to the list of available
tracks.
3 Use t and u (left/right cursor) to select tracks from
the list.
To go directly to any track, enter the track number
using the numerical keys 0-9.
4 Store each track by pressing OK.
➤ The track numbers will be added to the list of
selected tracks.
➤ The number of tracks and the playing time of the
program will be shown on the player display and the
audio screen.
When your FTS program is complete, press 2 PLAY to
start play, the FTS program will be automatically
memorized.
G Press FTS or use the t u (left/right cursor) to set
FTS to ON or OFF.
Erasing a track from an FTS-program
1 Use w (down cursor) to go to the list of selected
tracks.
2 Use t and u (left/right cursor) to select the track
number you wish to erase. To go directly to any
track, enter the track number using the numerical
keys 0-9.
3 Press OK.
➤ The track number will be erased from the list of
selected tracks.
Erasing the complete program
G Use w (down cursor) to select Clear All and press
OK.
➤ The complete FTS program for the disc will be
erased.
Audio Disk Mode
8 10321
time total tracks total time