Track Editing (On Cd Changer Only) - Philips FW-R88FW-R88 Manual

Erasing text
1 Press EDIT TEXT to enter the text edit menu.
is blinking,
y
CD TEXT EDIT
2 Rotate í JOG CONTROL ë to select the text erase menu.
is displayed.
y
3 Press YES to confirm.
4 Rotate í JOG CONTROL ë to select one of the following:
: All text of the selected disc is chosen to
y
be erased in one step.
: CD artist's name is chosen to be
y
erased.
: CD title is chosen to be erased.
y
or ( , ,...): artist's name of track 1 or
y
(2, 3,...) is chosen to be erased.
or ( , ,...): title of track 1 or (2, 3,...)
y
is chosen to be erased.
5 Press YES to confirm your selection.
or
y
6 Press YES to start erasing.
y is displayed and the chosen text is erased.
Erasing from the memory
When the text memory of your CD recorder is full, the
messages and
displayed. If you still want to add a new disc to the text
memory, you have either to erase another disc from the
memory or you have to finalize another disc.
1 Press EDIT TEXT to enter the text edit menu.
is blinking,
y
CD TEXT EDIT
2 Rotate í JOG CONTROL ë to select the memory view
menu.
is displayed.
y
3 Press YES to confirm.
4 Rotate í JOG CONTROL ë to select the disc you wish to
erase from the text memory.
5 Press YES to confirm.
is displayed.
y
6 Press YES to confirm the text erasure of that particular disc.
Note: If there are no discs in the text memory stored
will be displayed.
is displayed.
is displayed.
will be
is displayed.

Track editing (on CD changer only)

You can create a "track" by marking a passage of music within
one track on the current disc. This new "track" can be used for
recording or playing. The minimum track length is 4 seconds.
1 Press EDIT TRACK on the set.
starts blinking,
y
EDIT TRACK
number are displayed. The current track number also
blinks in the music calendar.
2 Rotate í JOG CONTROL ë until the desired track
number is displayed.
3 Press YES to confirm the selected track.
The marker position and the track time will be
y
displayed. The first 4 seconds of the track will be played
continously.
4 Press É PLAY/PAUSE on the set to play to the desired
start position of your new "track". (The initial position of
marker is always the start of the chosen track.)
• To fast forward to the desired start position press
à SEARCH or á SEARCH on the set.
• To fine tune the position press firstÉ PLAY/PAUSE on the
set, then rotate í JOG CONTROL ë.
5 Press YES to confirm the position of marker .
The marker position and the new "track" time will be
y
displayed. The first 4 seconds before marker position
until marker position will be played continously.
6 Press É PLAY/PAUSE on the set to play to the stop
position of your new "track" (the initial position of marker
is always the position of marker plus 4 seconds).
7 Press YES to confirm the marked passage.
is shown,
y
EDIT TRACK
displayed.
Note: If you open the CD changer tray the edit is deleted.
Clearing the track edit
1 Press NO during stop.
is displayed.
y
2 Press YES to clear the markers.
The markers are cleared.
y
FEATURES
and the current track
and the track edit time are
25