Table of Contents
Advertisement
Operation
General explication
About this manual
This manual gives the basic instructions for operating
this SACD player.
When playing DVD discs the player may not respond to
all operating commands. Some DVD discs are produced
in a way that requires specific operation or allows only
limited operation during playback. When this occurs,
please refer to the instructions in the disc inlay. When a
appears on the TV screen, the operation is not
permitted by the player or the disc.
Remote control operation
- Unless otherwise stated, all operations can be carried
out with the remote control. Always point the remote
control directly at the player, making sure there are no
obstructions in the path of the infrared beam.
- When there are corresponding keys on the front
panel, they can also be used.
Menu bar operation
- A number of operations can also be carried out via the
menu bar on the screen. The menu bar can be called up
by pressing any of the following keys on the remote
control: MENU SYSTEM, T, C, Angle, Audio
Language, Subtitle Language, Zoom and FTS.
- The following functions can be operated via the menu
bar:
- Personal Preferences;
- Track/title selection;
- Chapter selection;
- Audio language selection;
- Subtitle language selection;
- Angle selection;
- Zoom;
- Colour selection;
- Video FTS selection;
- Sound mode;
- Picture by picture;
- Slow motion;
- Fast motion;
- Time search.
- The various items can be selected with the t u
(left/right cursor) keys or by pressing the relevant keys
on the remote control.
- By pressing MENU SYSTEM the menu bar will
disappear from the screen.
- When selecting an item in the menu bar, the selected
item will be highlighted and the cursor keys (on the
remote control), to operate this item are displayed
below the icon.
- < or > indicates that more items are available at the
left/right hand side of the menu bar. Press t u (left/right
cursor) to select these items.
Switching on
1
If necessary, switch on the TV and select the video
input for your SACD player.
2
Press ON/OFF on the player front panel or
STANDBY on the remote control.
➤ The player display lights up.
➤ If the player is connected to the TV the start up
screen appears.
Note: When you switch off the player by means of the
ON/OFF switch on the front panel, the output of equipment
connected to Scart II will not be passed through to the TV set
on Scart I and vice versa.
OPERATION 19
Advertisement
Table of Contents
