Table of Contents
Advertisement
Getting to Know the TUN-3.7
Front Panel
A
B
For detailed information, refer to the pages in parentheses.
A
Standby/On button (19)
Sets the TUN-3.7 to On or Standby.
B
Standby indicator (19)
Lights up when the TUN-3.7 is on Standby.
C
Category [ ]/[ ] buttons (23, 26)
Used to select categories for satellite radio. With
HD Radio stations, they're used to select multicast
channels.
D
Preset [ ]/[ ] buttons (27)
Used to select radio presets.
E
Dimmer button (9)
Adjusts the display brightness.
F
Display button (24, 26)
Used to view various information on the display.
G
Band button (19, 22)
Used to select radio bands, AM, FM, and so on. The
bands available depends on the type of tuner board
installed.
H
Tuning/CH [
With AM and FM, these buttons are used for tuning.
With XM Radio, they're used to select stations.
I
Auto Scan button (26, 27)
Starts the Auto Scan function, which selects and
outputs each radio preset in turn for 5 seconds.
J
Remote control sensor (7)
Receives control signals from the remote controller.
K
Display
See the next page.
L
Memory button (27)
Used to store and delete radio presets.
M
Tuning Mode button (19, 23, 27)
With AM and FM, this button selects the Auto or
Manual tuning mode. With XM Radio, it selects the
search modes.
8
C 4 5
9
J
]/[
] buttons (19, 23)
K
* XM Radio/HD Radio reception requires C-HDXM
tuner board.
6
7
8
L M
Advertisement
Table of Contents
