Using Presets; Presetting Your Favorite Stations; Selecting Presets; Deleting Presets - Integra TUN-3.7 Instruction Manual

Using Presets

Auto Scan
Preset /
Preset –/+
Auto Scan

Presetting Your Favorite Stations

You can store any combination of up to 40 of your
favorite AM, FM, and XM Satellite radio stations as
presets.
■ Using the TUN-3.7:
1
Tune into the station that you
want to store as a preset.
2
Press the [Memory] button.
The MEMORY indicator appears and
the preset number flashes.
3
While the MEMORY indicator is
displayed (about 8 seconds), use
the Preset [ ]/[ ] buttons to
select a preset from 1 through 40.
4
Press the [Memory] button again
to store the station or channel.
The station or channel is stored and the
preset number stops flashing.
Repeat this procedure for all of your
favorite radio stations.
Memory
Tuning Mode

Selecting Presets

■ Using the Preset buttons:
To select a preset, use the
TUN-3.7's Preset [ ]/[ ] buttons,
or the remote controller's Preset
[+]/[–] buttons.
Remote controller
■ Using the Auto Scan function:
Press the [Auto Scan] button.
The Auto Scan function automatically
selects and outputs each radio preset in
turn for 5 seconds.
Remote controller
When you hear the station that you
want to listen to, press the [Auto Scan]
button again to stop auto scanning.

Deleting Presets

■ Using the TUN-3.7:
1
Select the preset that you want to
delete.
See the previous section.
2
While holding down the [Mem-
ory] button, press the [Tuning
Mode] button.
The preset is deleted and its number
disappears from the display.
27