Playing A Pre-Recorded Dvd-Video Disc; Playing A Recordable Dvd+Rw Disc - Philips DVDR1000 Instructions For Use Manual

Playing a pre-recorded DVD-
Video disc
Insert a pre-recorded DVD-Video disc.
When 'Autoresume' is set to 'On' (see 'User
Preferences') playback starts automatically from the
point where it was stopped, the last time the disc
was played.
When 'Autoresume' is set to 'Off', the disc will
play from the start of the disc. You can however
resume play from the point at which you stopped,
the last time the disc was played, by pressing
2 PLAY shortly after the disc starts to play.
The disc may invite you to select an item from a
menu. If the selections are numbered, press the
appropriate numerical key; if not, use the wv
(down up cursor) or t u (left right cursor) keys to
highlight your selection, and press OK.
The currently playing title and chapter number
are displayed in the system menu bar and the
recorder display. The elapsed time is shown in the
disc status window and the recorder display.
TITLE CHAPTER
DVD
To stop playback at any time, press 9 STOP or
DISC MENU.
16 QUICK START
TIME
Playing a recordable DVD+RW
disc
Insert a recordable DVD+RW disc.
If the disc is a new blank disc, the display will
show 'EMPTY DISC'.
If the inserted disc is write-protected, playback
always starts automatically.
When you press 2 PLAY, playback always starts
automatically from the point where it was stopped
the last time the disc was played or recorded. If you
want to start playback from the beginning of the
disc, you can do so via the Index Picture Screen (see
'Index Picture Screen').
With J PREVIOUS and K NEXT you can go to
the previous or next title.
To stop playback at any time, press 9 STOP or
DISC MENU.
You return to the Index Picture Screen.