Integra DTR-4.5 Instruction Manual page 9

Front & Rear Panels—Continued
S
Return button
This button is used to return to the previously dis-
played onscreen setup menu.
T
Master Volume control (44)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 99, or MAX
U
Phones jack (45)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
Display
1
6
For detailed information, see the pages in parentheses.
1
MUTING indicator (45)
This indicator flashes while the AV receiver is
muted.
2
REC OUT indicator (54)
This indicator lights up when the REC OUT is
selected.
3
ZONE 2 indicator (66)
This indicator lights up when Zone 2 is selected.
4
Listening mode & format indicators
These indicators show the currently selected listen-
ing mode and the format of digital input signals.
5
Tuning indicators (47)
TUNED: This indicator lights up when the AV
receiver is tuned into a radio station.
AUTO: This indicator lights up when the Auto Tun-
ing mode is selected, and disappears when the Man-
ual Tuning mode is selected.
MEMORY: This indicator lights up when presetting
radio stations.
FM STEREO: This indicator lights up when the
AV receiver is tuned to a stereo FM station.
6
SLEEP indicator (45)
This indicator lights up when the Sleep function has
been set.
2 3 4
V
Tone, [–] & [+] buttons (52)
These buttons are used to adjust the bass and treble.
W
Input selector buttons (44)
These buttons are used to select from the following
input sources: Multi CH, DVD, VIDEO 1,
VIDEO 2, VIDEO 3, TAPE, TUNER, or CD.
The [Multi CH] button selects the DVD analog mul-
tichannel input.
5
7
7
Message area
This area of the display shows various information
about the currently selected source.
9