Table of Contents
Advertisement
First Time Setup—Continued
7
Use the Up and Down [
buttons to select "d. Surround,"
and then use the Left and Right
Enter
[
Small: Select if the surround left and
Large: Select if the surround left and
None: Select if no surround left and
Note:
• If the Front setting in step 5 is set to
Small, the Large option cannot be
selected.
Continue with step 8.
Crossover
8
Use the Up and Down [
buttons to select "g. Crossover,"
and then use the Left and Right
Enter
[
crossover frequency.
Choose a crossover frequency suitable
for your setup. If you're using a sub-
woofer, choose a crossover frequency
based on the diameter of your front
speakers. If you're not using a sub-
woofer, use the diameter of any speaker
that you specified as Small.
Speaker cone
5-1/4 to 6-1/2 in.
3-1/2 to 5-1/4 in.
Under 3-1/2 in.
Notes:
• If the crossover frequency is set to a low value, and the
program material doesn't contain any sounds below
that frequency, the subwoofer will not output much
sound.
40
]/[
] buttons to select:
right speakers are small.
right speakers are large.
right speakers are connected.
]/[
] buttons to select a
Crossover
diameter
frequency
Over 8 in.
60Hz
6-1/2 to 8 in.
80Hz
100Hz
120Hz
150Hz
Double Bass
]/[
]
With the Double Bass function, you can boost bass out-
put by feeding bass sounds from the front left and right
channels to the subwoofer. This function can be set only
if the Subwoofer setting in step 4 is set to Yes, and the
Front setting in step 5 is set to Large.
9
Enter
10
Notes:
]/[
]
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Use the Up and Down [
buttons to select "g. Double
Bass," and then use the Left and
Right [
]/[
] buttons to select:
On: Double Bass function on.
Off: Double Bass function off
(default).
Press the [Setup] button.
The setup menu closes.
]/[
]
Hide quick links:
Advertisement
Table of Contents
