Page 2
Installing the In-Sink-Erator Filter System 1. Mount the Head & Filter Bracket of water is discharged from the vent. To conveniently redirect this discharge, a 6” section of gray tubing is provided. If you wish to install, simply slide one end of the gray tube over the vent and the other end into the hole on the head &...
Page 3
3. Make Plumbing Connections ( continued) Completely insert 3/8" polyethylene tubing from the outlet side of filter head into the 3/8" to 1/4" divider ("Y" quick-connect fitting).This divider allows the system to supply one or two plumbing fixtures with filtered water. To connect one plumbing fixture: Completely insert the plumbing fixture's 1/4"...
F201 Chemical & Mechanical Reduction Filter Specifications: (Use replacement cartridge F-201R) This cartridge (included with the system) provides mechanical and chemical reduction of dirt/rust, taste/odor, chlorine and particulates. System is tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Particulate Class I, Chlorine Class I, Taste and Odor.
F-201R for reduced chlorine taste and odor ...replace every 3 months To replace filter cartridges, call the In-Sink-Erator Answerline, or visit our website at www.insinkerator.com. REMEMBER! Replace your filter regularly with only genuine In-Sink-Erator Filter Cartridges F-501R for better tasting and healthier water ...replace every...