InSinkErator Invite H770-SS Specifications

The Next
Necessity
Dimensions
Minimum 2" required
from sink hole center
6-3/8"
to backsplash
4-3/8"
2-1/2"
1/4" Incoming
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
11"
NOTE: Max counter thickness is 3/4".
6-3/4"
6-1/8"
Job Specifications
HWD389-11F-45-02
Instant Hot Water Dispensers
H770-SS
The original instant hot water
™ dispenser with easy-to-twist handle
Submittal Sheet
• Hot Only – Dispenses near-boiling 200°F
• 35% more near-boiling water from larger
2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hr of near-boiling water
• 3-Year We Come To You
Service Warranty*
• 115 volts, 750 watts, 6.25 amps
• Available in chrome with black handle
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with
2/3-gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)
Complies with Lead Plumbing Law
1-800-558-5700
www.insinkerator.com
Printed in USA

Specifications

Capacity
Electrical
® In-Home Thermostat
Insulation
Valve
Recommended
Supply Pressure
Shipping Weight
Required
Hole Diameter
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right ot change or discontinue models.
Emerson Electric Co. All Rights Reserved.
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
115 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Meets U.L. 94HF-1
flammabiltiy
specification
Instant, self-closing
30-125 psi
Approximately
7.4 lbs.
1-1/4" – 1-1/2"
standard sink hole
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
© 2011 InSinkErator, a division of