Ryobi AIRgrip RLAG113S Operator's Manual page 14

OPERATiNG THE LASER LEvEL
See Figures 9 - 10.
 Place the level in the area where you want
the laser line projected.
 If a true vertical line or level horizontal line
is desired, level the tool by centering the
bubbles inside the vials located on top of
the laser head.
NOTE: To ensure plumb lines or level hori-
zontal lines across adjacent surfaces, level
both vials and position the tool directly in
front of the work area.
tOp view
ceNtereD
level
OPERATiON
 Turn on the laser.
 Rotate the laser head to position the laser
line where needed.
 With the laser beam pointed away from
you, rotate the laser lens to achieve the
desired angle of beam.
NOTE: Due to construction inaccuracy, walls
may not be perfectly straight. This may cause
the laser to have slight variances when in the
level position.
Fig. 9
4
Fig. 0