Ryobi AIRgrip RLAG113S Operator's Manual page 12

objects such as pipes, x4s, x6s, or metal
grates.
 Attach the strap to one side of the laser
level base by threading it through the loop
and fastening.
 Position the laser level on the surface
where you want it mounted.
 Wrap the strap around the object being
mounted (pipe, board, etc.).
 Place the loose end of the strap through
the remaining loop on the laser level base
and secure.
PUSH PiNS: Push pins allow the laser level
to be mounted to stucco and permeable sur-
faces.
 Place the laser level on the surface where
you want it mounted.
push
piN hOles
OPERATiON
 Align push pin with angled hole located on
one side of laser level base and push in to
secure.
 In the angled hole on the other side of laser
level base, secure the second push pin.
TRiPOd: The laser level base has a standard
/4 in.-0 threaded fitting for attaching to a
tripod base (not included). This method of
mounting is ideal for leveling kitchen cabinets,
countertops, window framing, and more.
CAUTiON:
Use caution when using laser level in base.
Do not orient in a way that will allow the
laser level to slide or fall out of the base.
tripOD
hOle
lOOp

velcrO
®
strap
push piNs
Fig. 7