Ryobi AIRgrip ELL0001 Operator's Manual
  1. Manuals
  2. Brands
  3. Ryobi Manuals
  4. Laser Level
  5. AIRgrip ELL0001
  6. Operator's manual

Ryobi AIRgrip ELL0001 Operator's Manual

Airgriptm laser level operator's manual ell0001
Hide thumbs

Advertisement

Table of Contents

Your laser level has been engineered and manufactured to Ryobi's high standards for depend-
ability, ease of operation, and operator safety. When properly cared for, it will give you years of
rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the
operator's manual before using this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
OPERATOR'S MANUAL
AIRgrip
ELL0001
LASER LEVEL
™
1

Advertisement

Table of Contents
loading

Related Manuals for Ryobi AIRgrip ELL0001

Summary of Contents for Ryobi AIRgrip ELL0001

  • Page 1 Your laser level has been engineered and manufactured to Ryobi’s high standards for depend- ability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

  • Page 2: Table Of Contents

    Parts Ordering / Service ... 18 INTRODUCTION This laser level has many features for making its use more pleasant and enjoyable. Safety, per- formance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

  • Page 3: Safety Rules

    Removing product labels increases the risk of exposure to laser radiation. SAFETY RULES n Do not place the laser level in a position that may cause anyone to stare into the laser beam intentionally or unintention- ally. Serious eye injury could result.
  • Page 4 SAFETY RULES n Save these instructions. Refer to them frequently and use them to instruct others who may use this laser level. If you loan someone this laser level, loan them these instructions also.

  • Page 5: Symbols

    This laser level has no serviceable parts. If the unit fails due to normal wear and tear within two years of purchase, return with original re- ceipt for a replacement unit at no charge. Call 1-800-525-2579 for your nearest RYOBI AUTHORIZED SERVICE CENTER. SAVE THESE INSTRUCTIONS SYMBOLS...

  • Page 6: Features

    FEATURES PRODUCT SPECIFICATIONS Recommended Use ... Indoor Length of Laser Line... Up to 40 ft., Horizontal or Vertical Laser ...Class IIIa, <5mW, 635 nm Power Supply ...2 AA, 1.5 Volt Batteries Battery Life — Laser Only ... 40 Hours Continuous Use—Alkaline Batteries Battery Life —...
  • Page 7 Velcro for push pins, and has a standard 1/4 in. - 20 tripod mounting hole. The base also protects the laser level when using on a dusty or dirty surface and during storage. ON/OFF SWITCH Your laser level conveniently turns on and off at the touch of a switch.

  • Page 8: Assembly

    Do not discard the packing material until you have carefully inspected and satisfac- torily operated the tool. n If any parts are damaged or missing, please call 1-800-525-2579 for assistance. PACKING LIST Laser Level Case Velcro Strap Push Pins (2) Multi-function Base Rough Surface Adaptor AA Batteries (2) Operator’s Manual...

  • Page 9: Operation

    INSTALLING BATTERIES See Figure 3. The battery compartment is located beneath the ridged area at the front of the laser level. To open: n Push the battery cover plate straight up and remove. n Install two AA batteries according to polarity indicators inside the battery compartment.
  • Page 10 TURNING ON/OFF See Figure 4. Press the switch located on the right side of the laser level to turn it ON and OFF. Always wait for at least 5 seconds between stopping and restarting the laser level. ON/OFF PRESS TO...
  • Page 11 Place the laser level against the adaptor on the dotted lines, and push in slightly to engage the seal. n Continue to hold the laser level against the surface while pressing the on/off switch. OPERATION n Release the laser level when you hear a change in motor sound.
  • Page 12 PIN HOLES OPERATION n Align push pin with angled hole located on one side of laser level base and push in to secure. n In the angled hole on the other side of laser level base, secure the second push pin.
  • Page 13 ADJUSTING THE LASER LINE See Figure 8. The laser level will project a straight line across an obstruction or interference, as well as around inside corners and onto adjacent surfaces. The line can be adjusted in two ways: n The line can be rotated 360˚ by turning the laser head in a clockwise or coun- terclockwise direction.
  • Page 14 OPERATING THE LASER LEVEL See Figures 9 - 10. n Place the level in the area where you want the laser line projected. n If a true vertical line or level horizontal line is desired, level the tool by centering the bubbles inside the vials located on top of the laser head.

  • Page 15: Maintenance

    Check the batteries regularly to avoid de- terioration. Remove the batteries from the laser level if it is not going to be used for an extended time. n Do not disassemble the laser level. This could cause exposure to hazardous laser radiation.

  • Page 16: Troubleshooting

    TROUBLESHOOTING PROBLEM Laser line projection is weak. Laser is off, but motor is on and vacuum is working. Laser line is hard to see. Laser line is not level. Laser line is horizontal when a vertical line is desired. CAUSE Batteries are low.
  • Page 17 NOTES...

  • Page 18: Parts Ordering / Service

    Please call 1-800-525-2579 for the nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

Table of Contents