Insignia NS-LTDVD20 User Manual page 8

Installing remote control batteries
To install the remote control batteries:
1 Open the battery compartment (1) on the
back of the remote control
1
2 Insert two AAA batteries into the battery
compartment (2). Make sure that the + and –
symbols on the batteries match the + and –
symbols inside the battery compartment.
3 Replace the battery cover.
6
Insignia NS-LTDVD20 20" LCD TV/DVD Combo
Using the remote control
To use the remote control:
•
2
www.insignia-products.com
Point the remote control directly at your
TV combo, within a 30° angle of the remote
control sensor on the front of your TV combo
and within 20 feet of your TV combo.
Caution
Do not expose the remote control to liquids, direct
sunlight, or shock.
Note
• Objects between the remote control and the
remote control sensor may block the remote
control signal.
• The range of the remote control may be
diminished if direct sunlight or strong lighting is
shining on the remote control sensor. In this
case, change the angle of the lighting, move
your TV combo, or opeate the remote control
closer to the remote control sensor.