Connecting An Ipod - Insignia NS-HD3113 User Manual

Insignia hd radio shelf system with ipod dock user guide
Hide thumbs Also See for NS-HD3113:
Table of Contents

Advertisement

Connecting to a TV
If your TV has component (Y, Pb/Cb, Pr/Cr)
connectors, use a component cable (not
provided) to make connections. This type of
connection provides the best picture.
If your TV does not have component connectors,
use the A/V composite cable (provided) to make
the connections.
TV
Video
Input Audio R Audio L
Composite
connection
Notes
• Before connecting your shelf system to a TV,
turn off and unplug both devices.
• If your TV has multiple ways to connect to your
shelf system, use only one type of connection.
Multiple connections can negatively affect
picture quality.
• Do not use both analog and digital connections
at the same time.
• Do not turn the shelf system on and off
repeatedly. Allow a minimum of 3 seconds in
between.
8
Insignia NS-HD3113 HD Radio Shelf System with iPod Dock
Y
Pb/Cb
Pr/Cr
AC power
Component
connection
www.insignia-products.com
Connecting to a digital amplifier
After making the digital audio connections
shown in the following illustration, see "Changing
audio settings" on page 12 to set up your shelf
system for digital audio output.
Video
connection
To connect an external digital audio device:
1 Make sure that your shelf system is turned
off.
2 Connect one end of a digital (optical or
coaxial) audio cable (not included) to the
appropriate DIGITAL LINE IN jack on the
external device, then connect the other end
of the cable to either the DIGITAL OPTICAL
or DIGITAL COAXIAL LINE OUT jack on
your shelf system.
3 Press STANDBY/ON
system.
4 Open the setup menu and set the audio
output to digital (see "Changing audio
settings" on page 12).
5 Turn on your digital amplifier and select the
correct input from your shelf system.

Connecting an iPod

You can control iPod playback just as you control
CD/DVD playback, by using the PLAY/ENTER,
STOP, and direction buttons.
To connect an iPod:
1 Make sure that the iPod and your shelf
system are turned off.
2 Insert the iPod into the dock on top of your
shelf system. Press down gently on the iPod
to make sure that the docking connector on
the iPod makes contact with the docking
connector in your shelf system.
Digital coaxial
- OR-
Digital optical
audio connection
TV
to turn on your shelf
®
®

Advertisement

Table of Contents
loading

Table of Contents