Insignia NS-R2000 User Manual page 12

3 Press and hold the TUNING/PRESET
buttons for more than 0.5 seconds.
OR
The tuner searches until a station of sufficient
strength has been found. The display shows
the tuned frequency and TUNED.
If the station found is not the station you want
to listen to, repeat this procedure.
Weak stations are skipped during auto
tuning.
Manual tuning
Manual tuning is useful when you already know
the frequency of the station you want to listen to.
To manually tune a radio station:
1 Press TUNER on the receiver or FM/AM on
the remote control to select the band.
OR
Item Description
1 Band
2 Frequency
Each time this button is pressed, the band
changes from AM to FM.
10
/
2
1
www.insignia-products.com
Insignia NS-R2000 Stereo Receiver
2 Press T/P MODE to select the tuning mode.
OR
PRESETS turns off.
3 Press the TUNING/PRESET
repeatedly until the right frequency has been
reached.
OR
Presetting
To preset a radio station:
1 Tune to the station with auto or manual
tuning.
2 Press the MEMORY button. MEM flickers for
five seconds.
/ buttons
OR