Insignia NS-A1111 User Manual page 9

NS-A1111_final_translationDTP.fm Page 9 Friday, February 17, 2006 12:09 PM
Insignia NS-A1111 5-CD Shelf System
Preset tuning
The system stores a total of 40 stations. (Each
band has a maximum of 20 available preset
stations.) Presetting allows you to tune into a
station directly. Stations are assigned preset
numbers, beginning from 1 in consecutive order
for each band (AM and FM).
To program preset radio stations:
1 Manually select a radio station (see page 8).
2 Press the memory button to store the station
in memory.
3 Repeat steps 1 and 2 to preset up to 20 AM
and 20 FM stations.
Recalling a preset station
To recall a preset radio station:
1 Press the ON/OFF button on the shelf
system once to turn it on.
2 Press the FUNCTION button to tuner mode,
which is shown by the radio frequency
indicator on the display.
3 Press the BAND button to select the band
(AM or FM), which is shown by the band
indicator on the display, then tune a station.
Note
In FM mode, the stereo indicator lights when
reception is good.
Note
After changing the band or turning the radio off and
on again, the last station selected is recalled.
4 Press the skip/search/preset button until the
desired number for the preset station shows
on the display.
F U N C T I O N F U N C T I O N F U N C T I O N F U N C T I O N
Note
The memory entry (channel number, frequency
band, and frequency) that have been stored
appear on the display in numerical order,
regardless of the frequency band.
Using the CD changer
Loading CDs
To load CDs in the changer:
1 Press the ON/OFF button on the shelf
system once to turn it on.
2 Press the FUNCTION button to CD mode,
which is shown on the display.
3 Press the open/close button to open the disc
tray.
4 Load the first disc into the disc tray, label side
up.
5 Press the disc skip button to revolve the disc
tray clockwise. Repeat to load up to five discs
in the CD changer.
6 Press the open/close button to close the disc
tray. There will be a slight delay while the CD
changer checks the discs.
Playing CDs
To play CDs:
1 Press the disc skip button to select the
desired disc, then press either of the skip/
search/preset buttons to select a track on the
selected disc. The selected disc flashes on
the display.
Note
The disc tray can be opened during playback to
change or add a disc not in play. While the tray is
open, the selected disc will not stop playing, but
the disc skip button will not work to select another
disc.
2 Press the PLAY/PAUSE button to start
playback. Press during play to pause play,
then press again to resume playing.
www.insignia-products.com
9