Table of Contents
Advertisement
Installation
The HD16 Camera is designed to be flush or surface mounted on a wall or
ceiling. It is weather sealed for indoor or outdoor locations.
Overview of Assembly Procedure
Task
1. Mount the HD16 to a ceiling or wall.
2. Connect the cable to the camera
board.
3. Secure the gimbal into the HD16
base.
4. Adjust the camera settings.
5. Secure the cover.
Figure 1
Document 900.0345 Rev 1.02
03/07
Installation Components
Gimbal
HD16 dome cover
See section
See "Mount the HD16" on page 8.
See "Connect the Power Cable" on
page 9.
See "Install the Camera Assembly"
on page 10.
See "Adjust the Camera" on page 10.
See "Secure the Camera and Dome
Enclosure" on page 16.
Skirt (optional)
HD16 base
7
Advertisement
Table of Contents
