Step 4: Dual Mode (Tv & Stb); Step 5: Lock; On/Off Options; Tv Only - Flipper LC Two Device Universal Instruction Manual

Example:
007 ADD, 044 ADD, 110 ADD, etc., for channels 7, 44,
110; For a DTV: 4 - 1 ADD; 44 - 2 ADD, for channels 4-1,
and 44-2
hi
3. Press the STB button after all channels are added to
complete the process.
hi
4. Use the Channel Up/Down
your Favorites. It may be necessary to scroll through
a second time for all Favorite channels to appear.
hi
5. If you need to add more channels, repeat. Otherwise,
go to Step 4.
hi
hi
Deleting Favorites:
hi
hi
hi
Follow the instructions above for adding channels,
except use the DEL button instead of the ADD button.
hi
hi
Switching Between Favorite and Regular Mode:
To exit favorite channel mode, press and hold DEL and
dash - at the same time until the light flashes twice and
turns off.
hi
To re-enter, press and hold DEL and dash - at the same
time until the light flashes twice and turns off.
hi
Step 4: Dual Mode (TV & STB)
hi
If you are using a TV without a STB, go to Step 5.
hi
In Dual Mode, the ON/OFF
and STB; Channel Up/Down
the STB; and Volume Up/Down
hi
To Enter Dual Mode, press and release ADD. The
indicator light will flash once.
hi
To Exit Dual Mode, press and release either TV or STB.
The indicator light will flash once.
hi
Note: The remote works best when the TV and STB are
close to one another. If the TV and STB do not turn
On and Off at the same time, press the
button until both devices turn either On or Off, or
manually turn On or Off the device.
6
buttons to scroll through
button controls both the TV
and the 0-9 keypad control
controls the TV
ON/OFF
Note: Flipper can be programmed to turn ON / OFF
either the TV or STB only – please see "ON / OFF
Options."
hi

Step 5: Lock

This feature "Locks" the settings of the remote,
including Favorites, and Dual Mode. If you do not want
to lock the set up of your remote control, set-up is
complete. Enjoy using your Flipper remote!
hi
To Lock
:
1. In Dual mode, press and hold ADD. The light will
flash once then turn solid. Release the button, and
enter 955. The light flashes twice.
2. In TV mode, press and hold TV. The light will flash
once then turn solid. Release the button, and enter
955.
3. In STB mode, press and hold STB. The light will flash
once then turn solid. Release the button, and enter
955.
hi
To Unlock
:
Follow the instructions above, except use code 956 to
unlock.

ON/OFF Options:

In Dual Mode, the ON/OFF
and STB. Occasionally, the remote may only turn On or
Off either the STB or TV. If this happens, press the
ON/OFF button again until both devices operate at the
same time. To avoid this from happening, place the TV
and STB close to each other.
hi
hi

TV Only

To have ON/OFF control the TV only,
control the STB, and Volume Up/Down
first set the code for the TV and STB as shown in Step One
and Two.
Then:
1. Press and hold the STB button and then the
button. The indicator light will flash once, then remain
flashing. Release both buttons.
turns On and Off both the TV
Channel Up/Down
control the TV,
ON/OFF
7