Samsung LN-R238W Owner's Instructions Manual page 15

C
O N N E C T I O N S
2
Connect this cable
to a two-way splitter.
3
Connect an RF cable
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box.
4
Connect an RF cable
between the ANT OUT
terminal on the cable
box and the B–IN
Incoming
terminal on the A/B
switch.
5
Connect another
cable between the
other OUT terminal on
the splitter and the
Incoming
A–IN terminal on the
RF (A/B) switch.
6
Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
Incoming
the ANT IN terminal on
the rear of the TV.
After you've made this connection, set the A/B switch to the "A" position for normal
viewing. Set the A/B switch to the "B" position to view scrambled channels.
(When you set the A/B switch to "B", you will need to tune your TV to the cable box's
output channel, which is usually channel 3 or 4.)
Incoming
cable
Splitter
Incoming
cable
Splitter
cable
Splitter
cable
Splitter
cable
Splitter
Cable Box
10
English-
Cable Box
Cable Box
Cable Box
RF (A/B)
Switch
RF (A/B)
Switch
RF (A/B)
Switch
ANT IN
TV Rear