Insignia 29400403A User Manual page 21

Insignia NS-HTIB51A 5.1 Channel Home Theater System
Listening modes
These listening modes become available when one
of the buttons described in "Selecting a listening
mode" on page 16 are pushed. The optional modes
available depend on which button is pushed.
Listening Mode Description
In this mode, audio from the input source is output without surround-sound processing. The "Sp Config (Speaker
Configuration)" (presence of speakers), "Sp Distance (Speaker Distance)" and "A/V Sync (A/V Sync)" settings are enabled,
Direct (Direct)
but much of the processing set via AUDIO is disabled. See "Using advanced setup" on page 19 for more details.
Sound is output by the front left and right speakers and subwoofer.
Stereo (Stereo)
Use this mode when watching an old movie with a mono soundtrack, or use it with the foreign language soundtracks
recorded in the left and right channels of some movies. It can also be used with DVDs or other sources containing
Mono (Mono)
multiplexed audio, such as karaoke DVDs.
Multichannel This mode is for use with PCM multichannel sources.
Multichannel
(Multich)
Dolby Pro Logic II Dolby Pro Logic II expands any 2-channel source for 5.1-channel playback. It provides a very natural and
seamless surround-sound experience that fully envelops the listener. As well as music and movies, video games can also
Dolby Pro Logic II
benefit from the dramatic spatial effects and vivid imaging.
(PL II Movie)
• Dolby PLII Movie–Use this mode with DVDs and videos that bear the Dolby Surround logo or TV shows that feature
(PL II Music)
Dolby Surround. You can also use this mode with stereo movies or TV shows and the receiver creates a 5.1 surround
(PL II Game) mix from the 2-channel stereo.
• Dolby PLII Music–Use this mode to add 5.1 surround to stereo sources such as music CDs and DVDs.
• Dolby PLII Game–Use this mode when playing game discs.
Dolby Digital In this mode, audio from the input source is output without surround-sound processing.
Dolby Digital
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
(Dolby D)
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
In this mode, audio from the input source is output without surround-sound processing.
Dolby Digital
1
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
Plus
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
(Dolby D+)
In this mode, audio from the input source is output without surround-sound processing.
Dolby TrueHD
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
(Dolby TrueHD)
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
In this mode, audio from the input source is output without surround-sound processing.
DTS (DTS)
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
In this mode, audio from the input source is output without surround-sound processing.
DTS-HD High
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
Resolution Audio
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
(DTS-HD HR)
In this mode, audio from the input source is output without surround-sound processing.
DTS-HD Master
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
Audio
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
(DTS-HD MSTR)
In this mode, audio from the input source is output without surround-sound processing.
DTS Express
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
(DTS Express)
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
In this mode, audio from the input source is output without surround-sound processing.
2
DSD
Sp Config (Speaker Configuration), (presence of speakers), Crossover (Crossover Frequency), Sp Distance (Speaker Distance),
(DSD)
A/V Sync (A/V Sync), and much of the processing set via AUDIO are enabled. See "Using advanced setup" on page 19.
3
This mode is for use with DTS 96/24 sources. This is high-resolution DTS with a 96 kHz sampling rate and 24-bit resolution,
DTS 96/24
providing superior fidelity. Use it with DVDs that bear the DTS 96/24 logo.
(DTS 96/24)
This mode expands any 2-channel source for up to 5.1-channel playback. It uses seven full-bandwidth channels of matrix
DTS Neo:6
decoding for matrix-encoded material, providing a very natural and seamless surround sound experience that fully envelops
(Neo : 6Cinema) the listener.
(Neo : 6Movie)
• Neo:6 Cinema–Use this mode with any stereo movie (such as TV, DVD, VHS).
• Neo:6 Music–Use this mode with any stereo music source (such as CD, radio, cassette, TV, VHS, DVD).
1
Dolby Digital is used for Blu-ray discs.
2
The receiver can use the DSD signal from HDMI IN. Setting the output on the player side to PCM might provide better sound to the player.
3
Depending on the input source, DTS is used.
www.insigniaproducts.com
Input
Speaker Layout
Source
MONO 2.1, 3.1, 5.1
STEREO
5.1ch
7.1ch
MONO 2.1, 3.1, 5.1
STEREO
5.1ch
7.1ch
MONO 2.1, 3.1, 5.1
STEREO
5.1ch
7.1ch
5.1ch 3.1, 5.1
7.1ch
STEREO 3.1, 5.1
5.1ch 3.1, 5.1
5.1ch 3.1, 5.1
7.1ch
5.1ch 3.1, 5.1
7.1ch
5.1ch 3.1, 5.1
5.1ch 3.1, 5.1
7.1ch
5.1ch 3.1, 5.1
7.1ch
STEREO 3.1, 5.1
5.1ch
5.1ch 3.1, 5.1
5.1ch 3.1, 5.1
STEREO 3.1, 5.1
17