Table of Contents
Advertisement
Tip
To listen to audio received by the HDMI IN jacks
through your TV's speakers:
•
Set the TV Control setting to On for a
CEC-compatible TV.
•
Set the Audio TV OUT setting to On when the TV
is not compatible with CEC or the TV Control
setting is Off.
•
Set your Blu-ray Disc/DVD player's HDMI audio
output setting to PCM.
•
To listen to TV audio through the receiver, see
"Connecting external components" on page 10.
Using the audio return channel (ARC) function
The audio return channel (ARC) function lets an
HDMI-capable TV send the audio stream to the
HDMI OUT jack of the receiver. To use this function,
you must select the TV/CD input selector and your
TV must support the ARC function.
Connecting external components
Note
The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT jack. If your TV is
connected to the MONITOR OUT V jack or the
COMPONENT VIDEO OUT jack, use the receiver's
display when changing settings.
Connect your components to the appropriate jacks.
The default input assignments are shown below.To
change assignments, see "Setting up Component
input (Component menu)" on page 19.
No. Jack
1
AUX INPUT
VIDEO
AUDIO L/R
2
DIGITAL IN
OPTICAL
IN 1 (GAME)
IN 2 (TV/CD)
COAXIAL
IN 1 (BD/DVD)
10
Signal
Components
Assign.
Composite
Camcorder
video
Analog audio
Digital audio
Game console
X
TV or CD player
X
Blu-ray disc/DVD
X
player
www.insigniaproducts.com
Insignia NS-HTIB51A 5.1 Channel Home Theater System
No. Jack
3
COMPONENT
IN 1 (BD/DVD) Component
VIDEO
IN 2 (CBL/SAT)
OUT
4
MONITOR OUT
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
TV/CD IN
*
Connect to a turntable (MM) that has a phono preamp built-in. If your
turntable (MM) does not have a built-in preamp, you will need a
commercially available phono preamp.
If your turntable has a moving coil (MC) type cartridge, you will need a
commercially available MC head amp or MC transformer as well as a
phono preamp. See your turntable's manual for details.
Notes
•
The receiver can output audio and video signals
from the AUX INPUT jacks to the VCR/DVR OUT
jacks.
•
With connection 2, you can enjoy Dolby Digital
and DTS.
•
With connection 4, if your Blu-ray Disc/DVD
player has both main stereo and multichannel
outputs, be sure to connect the main stereo.
•
With the connections described above, you
cannot record the video through the receiver. To
make a connection for video recording, see the
following section.
Connecting recording components
To record audio and video from the same
source input
VCR or DVR Recorder
Signal
Components
Assign.
Blu-ray disc/DVD
X
video
player
Satellite, cable,
X
set-top box
TV or projector
Composite
TV or projector
video
Analog audio
Blu-ray disc/DVD
and composite
player
video
VCR or DVD
recorder/Digital
Video recorder
Satellite, cable,
set-top box
Game console
Analog audio TV, CD player,
turntable*, cassette
tape player, MD,
CD-R
L
R
AUDIO
VIDEO
IN
IN
Cassette, CDR, or MD
OR
Advertisement
Table of Contents
