Linksys SRW208 User Manual page 20

Chapter 4
SSH Crypto Key Generation
SSH Keys Fingerprints
On the SSH Keys Fingerprints screen, the RSA and DSA keys
will be displayed if they have been generated.
Select Refresh to update the screen if necessary. To exit,
select Quit and press the Enter key.
SSH Keys Fingerprints
User & Password Settings
From this screen, you can administer the user names and
passwords of those accessing the Switch.
Select Edit and press the Enter key to make changes.
When your changes are complete, press the Esc key to
return to the Action menu. Select Save and press the
Enter key to save your changes. To exit, select Quit and
press the Enter key.
User & Password Settings
8-Port 10/100 Ethernet Switch with Webview
Configuration Using the Console Interface
The Username & Password Settings screen
NOTE:
can also be used to set passwords for other
users.
Security Settings
The Security Settings screen enables you to configure
security settings on the Switch, as well as generate and
display the certificate.
Security Settings
SSL Certificate Generation
Use the Certificate Generation screen to specify a device-
generated certificate.
The following fields are specified:
Specifies the SSL RSA key length.
Public Key Length
(Range: 512 - 2048)
Specifies the organization name.
Organization Name
(Range: 1 - 64)
Locality or City Name
(Range: 1 - 64)
State or Province Name
name. (Range: 1 - 64)
Specifies the country name. (Range:
Country Name
2 - 2)
Specifies number of days certification is
Validity Term
valid. (Range: 30 - 3650)
Specifies the location or city name.
Specifies the state or province
13