Maintenance; Maintenance Table; Maintenance Display System; Note For Replacement Of Consumable Parts - Sharp AR-5316 Service Manual

[10] MAINTENANCE

1. Maintenance table

X:Check(Clean, adjust, or replace when required.)
O:Clean
Unit name Part name
Optical Lamp unit Reflector
section
Mirror
No.2/3 Mirror
mirror unit
Pulley
CCD Lens
peripheral
Glass Table glass
White Plate
Other Drive wire
Rail
Document cover
Document size sensor
LSU Dust-proof glass
Paper feed Multi paper Take-up roller
section feed (manual / SPF)
section
Paper feed roller
Spring clutch
Paper PS roller
transport
Transport (paper exit)
section
rollers
Spring clutch
Fusing Upper heat roller
section
Pressure roller
Pressure roller bearing
Upper separation pawl
Lower separation pawl
Cleaning pad
Drive Gears
section
Belts
Paper exit Ozone filter
section
:Replace :Adjust :Lubricate
When
calling
O
O
O
X
O
O
O
X
X
O
O
O
O
O
O
O
O
O
O
O
X
X
X
X
X
X
X
AR-5316 MAINTENANCE 10-1

2. Maintenance display system

Toner Life: 9K
LED
Near Empty: Illuminate
Empty : Blink
Machine
Near Empty: Active (about 300 page remains)
Empty: Stop
Drum Life: 30K
LED&Machine
LED illuminate at 29K.
After the LED illuminates, if another 1K copies are
made the light will start blinking and the machine will
stop.
(Whether the machine will stop at 30K or not can be
selected by service simulation setting.)
Maintenance LED
Illuminate at 150K. (for upper heat roller)
Not illuminating can be selected by service man
simulation setting.
Default: illuminate at 150K
Choice: 150K or Free(not illuminating)
Machine
Whether the machine will stop at 150K or not can be
selected by service simulation setting.
Default: Free (not stop)
Choice: stop at 150K or Free

3. Note for replacement of consumable parts

A. TD cartridge
When a waste toner cartridge is removed from the machine, it must be
put in a polyethylene bag to avoid scattering of toner.
B. Drum cartridge
Do not shake or put up the developer cartridge. Otherwise developer
may scatter.