CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
7. Remove the KEYMAT ASSEMBLY SYMBIAN.
9. Gently open the flex connector with the SRT-6.
11. Separate the LCD MODULE by releasing the 4 snaps
with the SRT-6.
Service Manual 3250 RM-38
Page
13
(38)
CONFIDENTIAL
8. Carefully bend open the 2 metal snaps of the DISPLAY SHIELD
ASSEMBLY on the left side.
10. When the clips are released properly, the shield can be lifted
up easily.
12. Carefully slot through the flex connector. Always use a new
DISPLAY SHIELD ASSEMBLY when reassembling.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
DJk
16.3.2006