CMO Operations & Logistics
WW Competence Transfer
Multimedia Creation & Support
7. To prevent damaging the plastic threads, turn the screws left
first, then thighten them slightly.
9. Turn over the lower block.
11. Turn back the lower block.
Service Manual 3250 RM-38
Page
27
(38)
CONFIDENTIAL
8. Apply the torqure of 18Ncm to the screws in the order shown.
10. Continue tightening the next screws with the torque of
18 Ncm in the order shown.
12. Carefully close the connector. Do this evenly side by side.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 2.0
DJk
16.3.2006