LevelOne FBR-1461 User Manual page 34

RFC 1483 Routed Connections
Description: Your description of this connection.
VPI and VCI: Enter the information provided by your ISP.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single IP account, sharing the single IP address. If users on your LAN
have public IP addresses and can access the Internet directly, the NAT function can be
disabled.
Encapsulation method: Select the encapsulation format, the default is LLC Bridged. Select
the one provided by your ISP.
IP Assignment
DHCP client: Enable or disable the DHCP client, specify if the router can get an IP
address from the Internet Service Provider (ISP) automatically or not.
Obtain an IP address automatically via DHCP client to enable the DHCP client
function or click Use the following IP address to specify an IP address to disable the
DHCP client function, and specify the IP address manually. The setting of this item is
specified by your ISP.
RIP: Disable, RIP v1, RIP v2, RIP v1+v2 and RIP v2 Multicast.
Apply: Click to save settings
Cancel: Click to discard changes
31