Microcombi, Gentle / Microcombi, Intensive; Recommended Settings - Siemens HB86P.75 Instruction Manual

†
Press the button.
3.
Operation starts. The heating bars of the temperature
indicator appear in the status bar.
3UHKHDWLQJ
 
7RS
ERWWRP KHDWLQJ
4. Once the dish is ready, switch the oven off with the
or select and apply a new operating mode.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Opening the oven door during cooking
†
Operation is suspended.
after closing the oven door. The programme will then continue.
Pausing operation
†
†
Press the button. The oven is paused,
the button again, operation continues.
Cancelling operation
†
Press and hold the button until 3D hot air, 160 °C appears.
You can make new settings.
Calling up information
±
Press the button briefly. For any information, press the
button again briefly. Before the appliance is started, information
is displayed on the types of heating, shelf positions and
accessories. After the appliance is started, you can check the
heating temperature in the cooking compartment.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.

MicroCombi, gentle / MicroCombi, intensive

For these types of heating, a microwave power setting is
automatically switched on. You simply need to set the
temperature specified in the recipe and halve the cooking time.
MicroCombi, gentle
MicroCombi, gentle is suitable for cakes in tins, such as
Sponge cake, e.g. marble cake, fruit loaf, fruit flan
■
Short-crust pastry with moist filling, e.g. apple pie,
■
cheesecake
Cakes made from baking mixtures
■
Yeast cake, e.g. with currants
■
For roasting, the cooking time can also be halved with this
■
type of heating.
Note: Use dark metal baking tins or else plastic "FlexiForm"
bakeware. For joints, a heat-resistant glass dish with or without
a lid is suitable.
MicroCombi, intensive
This type of heating is suitable for
poultry, e.g. chicken
■
baked casseroles, e.g. pasta bake
■
gratins, e.g. potato gratin
■
grilled fish, fresh and frozen
■
 ƒ&
‡
†
flashes. Press the button again
†
flashes. Press
Note: Use heat-resistant containers made of glass or ceramic.
Setting procedure
If there is information in the recipe for different types of heating,
take the setting for Top/bottom heating. The cooking time
specified in the recipe should not exceed 30 minutes.
Place your food in the cold cooking compartment. Place the
ovenware in the centre of the wire rack at level 1.
"
Press the
1.
3D hot air and 160 °C are suggested in the display.
button
Using the rotary selector, set the "MicroCombi, gentle" or
2.
"MicroCombi, intensive" heating type.
The status bar suggests
¿
Use the button to switch to the temperature and set the
3.
temperature using the rotary selector.
0
4. Press the
button.
5. Turn the rotary selector to set the required cooking time.
0
6. Press the
†
Press the
7.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
x
A signal sounds. Microwave operation has finished. The status
bar shows
finished sounding by pressing the
±

Recommended settings

If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, fish,
meat and game through to bakes and pre-prepared products.
You can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
"
Press the
1.
:
3D hot air, 160 °C are suggested in the display.
Turn the rotary selector anticlockwise to
2.
settings.
Move to the first food category with the
3.
the required category with the rotary selector.
Move to the next level with the
selector to make the next selection. The setting for the
selected dish now appears.
†
4. Press the
Appliance operation begins. You can see the suggested
cooking time counting down in the status bar.
The cooking time has elapsed
x
A signal sounds. The oven stops heating. The status bar shows
0:00. You can cancel the signal early by pressing the
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
0
Press the button and move to the cooking time with the
0
button. Change the cooking time using the rotary selector.
Press the button.
button.
x
20:00 minutes.
button and move to the cooking time with the
button to close the menu.
button.
0
0:00. You can cancel the signal before it has
button.
button.
¿
button. Turn the rotary
button.
¿
j
Recommended
¿
button and select
x
0
¿
9