Panasonic KX-MB778TW Operating Instructions Manual page 71

Problem
The [Windows Security Alert]
dialogue box appears and asks
if you want to block
[PCCMFLPD] and I cannot
operate the following functions
after installing the Microsoft
Windows XP Service Pack 2.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device Monitor
10.3.8 If a power failure occurs
L The unit will not function.
L If any documents are stored in the memory (i.e. during copy, PC printing), they will be lost.
L The unit is not designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
L Fax transmission and reception will be interrupted.
L Documents during fax transmission or fax reception will be lost.
L When power is restored, a power down report will be printed out stating which fax items in the memory have been
erased.
10.3.9 Firewall setting tool for Microsoft Windows XP Service Pack 2/Windows Vista users
(KX-MB788, LAN connection only)
After installing Microsoft Windows XP Service Pack 2/Windows Vista, you will not be able to use the following
functions because the Windows Firewall feature will be activated and block the connection.
– Device Monitor
– LPD Manager (Network communication tool)
The Windows Firewall Setting Tool enables you to change the Windows Firewall security settings and to use the above
functions properly.
1
Insert the CD-ROM that is included with the unit into your CD-ROM drive.
L [Panasonic Setup] dialogue box will appear.
2
[Tools] i [Windows Firewall Setting]
L The [Windows Firewall Setting Tool] window will appear.
3
[Add to the exceptions list] i [OK] i [OK]
To confirm the security settings (For Windows XP users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialogue box will appear.
3. Click the [Exceptions] tab.
4. Confirm that [Panasonic Trap Monitor Service] and [PCCMFLPD] are displayed and checked on the
[Programs and Services] list.
To confirm the security settings (For Windows Vista users)
1. [Start] i [Control Panel] i [Security Center]
L The [Windows Security Center] window will appear.
2. [Windows Firewall]
L The [Windows Firewall] dialogue box will appear.
3. [Change Settings]
Cause & Solution
L Click [Keep Blocking] and run the Windows Firewall Setting Tool to allow
the data transmission for Multi-Function Station (page 71).
10. Help
71