DFI-ITOX G4S300-B User Manual page 86

Rev. a+ system board
Table of Contents

Advertisement

3
BIOS Setup
3.1.6.3 IRQ Resources
This field is used to set each system interrupt to either "PCI
Device" or "Reserved".
3.1.6.4 PCI/VGA Palette Snoop
This field determines whether the MPEG ISA/VESA VGA cards
can work with PCI/VGA or not.
Enabled MPEG ISA/VESA VGA cards work with PCI/VGA.
Disabled MPEG ISA/VESA VGA cards does not work with PCI/
3.1.6.5 PCI IRQ Assignment
By default, an IRQ is automatically assigned to the PCI devices
that are installed in the PCI slots. If a PCI device has not been
assigned an IRQ, you must manually assign an IRQ for the device.
During system boot-up, you will see "NA" for the device that
does not have an IRQ assigned.
86
VGA.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents