DFI-ITOX G4S300-B User Manual page 63

3.1.2.8 Boot Up NumLock Status
This allows you to determine the default state of the numeric
keypad. By default, the system boots up with NumLock on
wherein the function of the numeric keypad is the number keys.
When set to Off, the function of the numeric keypad is the ar-
row keys.
3.1.2.9 Typematic Rate Setting
Disabled Continually holding down a key on your keyboard
Enabled The BIOS will not only report that the key is down,
3.1.2.10 Typematic Rate (Chars/Sec)
This field allows you to select the rate at which the keys are
accelerated.
3.1.2.11 Typematic Delay (Msec)
This field allows you to select the delay between when the key
was first depressed and when the acceleration begins.
will cause the BIOS to report that the key is down.
but will first wait for a moment, and, if the key is still
down, it will begin to report that the key has been
depressed repeatedly. For example, you would use
such a feature to accelerate cursor movements with
the arrow keys. You can then select the typematic
rate and typematic delay in the "Typematic Rate
(Chars/Sec)" and "Typematic Delay (Msec)" fields
below.
BIOS Setup
63
3