DFI-ITOX G4S300-B User Manual page 38

2
Hardware Installation
•
Line-in Jack (Light Blue)
This jack can be connected to the line-out jack of any external
audio devices such as Hi-fi set, CD player, AM/FM radio tuner,
synthesizer, etc. Connect a stereo cable from the line-out jack of
your external device to this line-in jack.
•
Mic-in Jack (Pink)
This jack is used to connect an external microphone.
Front Audio
The front audio connector (J5) provides you the option of con-
necting devices to the line-out and mic-in jacks at the front panel.
Using the line-out and mic-in jacks will disable the rear audio's line-
out and mic-in functions.
Remove the jumper caps from pins 5-6 and pins 9-10 of J5 prior to
connecting the front audio cable connector. Make sure pin 1 of the
cable connector is aligned with pin 1 of J5. If you are not using this
connector, make sure to replace the jumper caps back to their
original pin locations.
38
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.