Adaptive Micro Systems Alpha Installation And Operation Manual page 25

NOTE: Wall mounting fasteners are not supplied.
End view of sign
To keep the sign from
overheating, make sure
there is at least 3 inches of
clearance between the
bottom of the sign and any
surface.
5. Proceed with the electrical connection of the sign. (See "Electrical
connection" on page 20.)
Installation: Mounting instructions
WARNING
Possible crush hazard.
Mount sign on a wall that can
support at least 400 lbs (181 kg).
Attach sign to wall with
fasteners that can support
at least 400 lbs (181 kg).
Otherwise the sign may fall
causing serious injury or death.
To keep the sign from overheating, make sure
there is at least 3 inches of clearance around
the bottom of the cooling fan ducts.
®
ALPHA
Use two fasteners (not
supplied) to attach each
bracket to a wall.
The weight-supporting
capacity of all fasteners
used for mounting the
sign must total 400
pounds (181 kg) or more.
™
Solar Sign
19