Setting A Sign's Password - Adaptive Micro Systems Alpha Installation And Operation Manual

® ™
ALPHA Solar Sign

Setting a sign's password

Some signs allow you to set a personal password to protect your
messages and graphics from tampering by others.
NOTE: DON'T FORGET YOUR PASSWORD! If you do, you won't
be able to operate the sign.
If you do forget the password, see "What to do when you forget
a sign's password" on page 9.
Step When you do this...
1 Press PROGRAM.
2 Press BACK until SET PASSWORD appears.
3 Press ADV.
4 Press Y to set a password.
Type a 6-character password. (Asterisks will appear
on the sign as you type.)
Retype the password when prompted.
5
CORRECT will appear if you entered the same
password.
If you failed to type the same password, ERROR will
appear, and you'll have to start over from Step 1.
8
You see this...
PROGRAM
TEXT FILE A
SET
PASSWORD
SET PASSWORD? Y/N
ENTER 6 CHARACTERS
******
THEN
RE-ENTER THE 6
THEN
CORRECT
THEN
PROGRAM
TEXT FILE A
Basic sign operation: Setting a sign's password