Setting The Date And Time; Turning Power Save On Or Off - Insignia NS-DSC1110A User Manual

To imprint the date and time on photos:
1 Turn on your camera, then press MODE to
switch to Photo
2 Press MENU. The on-screen menu opens.
3 Press / or / to select the
The Setup menu opens.
4 Press / or
then press / or OK/DISP to open the
submenu.
5 Press / or
Date & Time, then press OK/DISP.
6 Press MENU to close the menu.

Setting the date and time

Note
• The date and time can only be set when Simple
mode is set to Off.
To set the date and time:
1 Turn on your camera, then press MODE to
switch to Photo
2 Press MENU. The on-screen menu opens.
3 Press / or / to select the
The Setup menu opens.
20
mode.
(setup) tab.
/ to highlight Date Stamp,
/ to select Off, Date, or
or Video mode.
(setup) tab.
www.insigniaproducts.com
NS-DSC1110A 10 Megapixel Camera
4 Press / or
then press / or OK/DISP to open the date
and time screen.
5 Press / or
/ to move to the minutes field.
Tip
You can press and hold a navigation button to
change the values continuously.
6 Repeat Step 4 to select AM or PM and to enter
the year, month, and day.
Note
If the batteries are removed for longer than 48 hours,
the date and time must be reset.
7 Press MENU to close the menu.

Turning Power Save on or off

Note
The power save function can only be accessed when
Simple mode is set to Off.
The Power Save function automatically turns off
your camera after being idle for a specified period
of time to save power.
This function is turned off when:
• Recording and playing a video
• Erasing or copying files
• Using the USB connector
Note
Connecting your camera to a computer using the
USB connector will not recharge your camera's
batteries or enhance battery life. Make sure that you
disconnect your camera from the computer and
power down your camera when you are finished
transferring files to your computer.
To turn Power Save on or off:
1 Turn on your camera, then press MODE to
switch to Photo
2 Press MENU. The on-screen menu opens.
/ to highlight Date & Time,
/ to set the hour, then press
or Video mode.