Taking Photos; Using The Zoom; Using The Flash - Insignia NS-DSC1110A User Manual

10 Megapixel Camera
5 Press / or
then press OK/DISP to open the submenu.
6 Press / or
press OK/DISP to save the setting and exit to
the previous menu.
7 Press MENU again to exit the on-screen menu
and begin taking photos or video.

Taking photos

To take photos:
1 Turn on your camera.
2 Press MODE one or more times until the Photo
mode icon appears in the upper-left of the
LCD.
3 Frame the image using the focus bracket on the
LCD.
/ to highlight Simple Mode,
/ to highlight Off or On, then
www.insigniaproducts.com
4 Press the shutter button down halfway. Your
camera automatically adjusts the focus and
exposure. When your camera is ready to take the
photo, the focus bracket turns green, and the
aperture value, shutter speed, and ISO setting
are displayed.
Note
If the shake warning
hold the camera steady, with your arms at your sides,
or use a tripod to stabilize the camera in order to
prevent blurred images.
5 Fully press the shutter button to capture the
image.

Using the zoom

Your camera features 3x optical zoom and 5x digital
zoom.
To use the zoom:
• Press the zoom buttons to zoom in (T) or zoom
out (W).
The zoom indicator appears on the LCD. The section
of the zoom indicator on the right side indicates
that digital zoom is being used.

Using the flash

When taking pictures in difficult lighting
conditions, use the flash to get correct exposure.
This function cannot be activated for recording
video.
To activate the flash:
• Press on the navigation control repeatedly until
the flash mode you want is displayed on the LCD.
Flash icon
icon appears on the LCD,
9