Transferring Files To A Computer; Troubleshooting - Insignia NS-DSC1110A User Manual

10 Megapixel Camera
Transferring files to a
computer
You can transfer photos and video files to your
computer.
To transfer files to a computer:
1 Connect the camera to a camera using the
supplied USB cable.
2 Turn on the camera. The computer detects the
connection. Your camera's internal memory and
memory card display as removable drives in the
file manager. No image is displayed on the LCD.
Note
You can also use a card reader to access the memory
card contents of your camera.

Troubleshooting

Problem
Camera does not turn on
Camera turns off automatically Press any button except POWER button to turn on
LCD turns blank
Empty battery icon is displayed
on the LCD, then the camera
turns off.
LCD screen displays "No image" No images have been stored in the memory media
LCD screen displays "Not avail-
able for this file"
LCD screen displays "Memory
full"
LCD screen displays "Card
locked"
LCD screen displays "Format
error"
LCD screen displays "Copy
error"
The lens does not retract
www.insigniaproducts.com
Cause and/or Action
The batteries may be exhausted. Charge or replace
the batteries.
the camera.
Press any button except POWER to turn on the LCD.
Batteries are exhausted. Replace or recharge the
batteries.
currently in use.
The image file format stored on a memory card
may not be supported.
Function is only available for specific file types.
File format is not supported.
Memory card is full. Replace the memory card with
a new one or delete unnecessary files.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlocked
position.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlocked
position.
The memory card is protected. Remove the card
and slide the write-protect switch to its unlocked
position.
The memory card is full. Replace card or delete
unnecessary files.
Do not force the lens to go back. The type of the
battery used may be incorrect or the battery power
level is too low. Change the battery or charge the
battery before using your camera.
23