Fitting The Décor Strip; Connecting To The Mains Water Supply - Haier BYWR1206 User Manual

o If you are fitting the optional décor strip (see below). You should
take into account the height that this will add to the appliance,
when adjusting the levelling feet.
Fitting the décor strip
o Your appliance is supplied with an optional décor strip that can
be fitted to the top of the appliance.
You should screw the décor strip to the front edge of the
appliance, using the screws provided.

Connecting to the mains water supply

o If you only have a cold water supply available, you should connect
the two hoses to the cold water outlet, by using a "Y" connection
piece.
o Alternatively, there is a blanking cap supplied with the appliance,
you can securely tighten this over the hot water valve. The washing
machine will adjust to allow the correct amount of water through
the cold inlet hose.
o Your appliance is a hot and cold fill
machine. Ideally
connect an inlet hose to the hot
water inlet valve and the cold
water inlet valve.
o The water inlet hoses will be
inside the drum of your washing
machine, when you receive the
appliance.
you should
33