The Function Mode; To Select A Function - Yamaha YPP-200 Ligh Piano Owner's Manual

The Function Mode

The [FUNCTION] button provides access to a range of functions that give the
YPP-200 extraordinary versatility. The functions are categorized in groups as
follows:
F1
F2
F3
F4
F5
F6
F7
F8
G Operation Example
Press [+/YES]
(sub-mode)
Use [TEMPO/
FUNCTION t, s]
Press [-/NO] or [+/YES]
once
Use [-/NO], [+/YES]
26
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
YPP-200
Tuning ...................................................................... 27
Scale ........................................................................ 27
Dual Mode Functions ............................................. 28
Soft Pedal Mode...................................................... 29
Metronome Volume ................................................ 29
Preset Song Part Cancel Volume .......................... 29
MIDI Functions ........................................................ 30
Backup Functions .................................................. 33

To Select a Function ...

Z
Press the [FUNCTION] button so that its indicator lights.
X
Use the [TEMPO/FUNCTION t, s] buttons to select the desired
function: F1 through F8.
C
In the case of the Scale (F2), Dual Mode (F3), MIDI (F7), and
Backup (F8) functions, you will have to press the [+/YES] button
once to enter the respective sub-mode after the function has been
selected, and then use the [TEMPO/FUNCTION t, s] buttons
again to select the desired sub-function.
V
Set the function as required by using the [-/NO] and [+/YES]
buttons (see the individual function descriptions, below).
B
Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
............................................................................
• Functions cannot be selected during demo/preset song playback or when
the user song recorder is in operation.
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, " F3. - " will appear on the display and the
sub-mode will not be available.
• After selecting the function, the current setting will be displayed when the
[-/NO] or [+/YES] button is pressed for the first time.