Walgreens WGNBPW-720 User Manual page 12

4. All digits will light up, checking the display functions.
The checking procedure will be completed after
about 3 seconds.
PM
U P
N
D O W
5. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
This cuff will then begin deflating as measurement
continues.
PM
PM
Note:
The monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
AVG. 3 PM
ROTATE
LEFT
RIGHT
PM
21
6. When the measurement is completed, the cuff will
deflate entirely and systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen. The measurement is then automatically
stored into memory.
PM
Note:
• This monitor automatically turns off approximately 1
minute after last operation. You may also press the
START/STOP button to turn the unit off.
• To interrupt the measurement, you may press the
START/STOP button (recommended), MEMORY,
User-Select or Date/Time Set (USER 1/2 /
buttons. The cuff will deflate immediately after a
button is pressed.
)
22