User Preset; Storing The Audio Adjustment Level; Recalling The Audio Adjustment Level; Turning Media Xpander On/Off - Alpine iDA-X303 Quick Reference Manual

USER PRESET
• If IMPRINT audio processor is connected, you can make more
detailed settingsfor the audio setting. For details, refer to "1MPRINT
Operation (Optional)" (page 29).
Storing the Audio Adjustment Level
You can store up to 3 adjusted/set contents on this unit.
All of the following adjusted/set items are stored in a preset
memory.
Items
to
be adjusted/set Reference page
EO ADJ (Parametric EO/Graphic EO) page 3D-page 31
TCR page 31
X-OVER
page 31
t
Turn the Double Action encoder to select a preset
number, and press and hold C\/ENTER for at least
2 seconds.
2
Turn the Double Action encoder to select
PROTECT YESINO, and then pressC\IENTER to
store the adjusted contents.
PROTECT YES (Initial setting)
H
PROTECT NO
• If
YES is selected, the adjusted contents are protected and stored into
the preset numbers. When you want to store the parameter into a
protected preset number, "REPLACE NOIYES" can be selected.
• If
PROTECT NO is selected, the preset is stored.
• While perform this operation, all adjusted contents of Parametric
EQlGraphic EQ, Time Correction and X-Over will be stored in the
preset number.
• The stored contents are not deleted even when resetting the unit or
disconnecting the battery,
Recalling the Audio Adjustment Level
You can recall the contents stored in "Storing the Audio Adjustment
Level" (page 30).
t
Turn the Double Action encoder to select a preset
number, and press C\/ENTER.
Adjusted/set contents of the selected number are recalled.
• The User Preset screen can also be recalled in normal mode by
pressing and holding PRESET for at least 2 seconds.
When the Media Xpander is on, you can adjust the Media Xpander level
(refer to page 33).
OFF (Initial setting)
H
ON
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
FLAT
H
POPS
H
ROCK
H
NEWS
H
JAZZ&BLUES
H
ELECTRICAL DANCE
H
HIPHOP&RAP
H
EASY LISTENING
H
COUNTRY
H
CLASSICAL
H
USERl
H
USER2
H
USER3
H
USER4
H
USER5
H
USER6
• By selecting User's I
to 6,
you can recall the stored preset number in
"Adjusting the Graphic Equaliz.er Curve" (page 31) or "Adjusting
the Parametric Equaliz.er Curve" (page 30).
30-EN
The selling of Parametric EQ/Graphic EQ Adjustment, Time Correction
and X-Over can be adjusted in this mode.
Adjusting the Parametric Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. To adjust the Parametric Equalizer
Curve, set the EQ mode to PARAMETRIC EQ. For details, refer to
"Setting EQ mode" (page 32).
t
After selecting EQ ADJ (Parametric EQ) from the
Sound Field Adjustment mode, turn the Double
Action encoder to select the band adjustment, and
then press C\/ENTER.
BANDl ~ BAND2 ~ BAND3 ~ BAND4 ~ BAND5 ~ BAND1
2
Turn the Double Action encoder to select an item
to adjust, then press C\/ENTER.
FC
~
LV
~
Q
~
FC
(frequency) (level) (bandwidth) (frequency)
Frequency Adjustment
3-1
Turn the Double Action encoder to select
frequency bands.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
BAND1: 20 Hz-SO Hz (63 Hz)
BAND2: 50 Hz-200 Hz (150 Hz)
BAND3: 125 Hz-32 kHz (400 Hz)
BAND4: 315 Hz-S kHz (1 kHz)
BAND5 SOO Hz-20 kHz (2.5 kHz)
Level Adjustment
3-2
Turn the Double Action encoder to adjust the
level.
Adjustable level: --B to +6 dB
Bandwidth (Q) Adjustment
3-3
Turn the Double Action encoder to set the
bandwidth (Q).
Adjustable bandwidth: 1, 1.5, 3
4
To adjust another band, repeat steps 1 to 3 and
adjust all bands.
• The frequencies of adjacent bands cannot be adjusted within 4 steps.
• While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
• You can select the next band by pressing and turning the Double
Action encoder.
• The User Preset screen can be recalled in the normal mode by
pressing and holding PRESET for 2 seconds.