Bluetooth Setting; Setting The Bluetooth Connection; Audio Setting (Only When External Audio Processor Is Connected); Operating The External Audio Processor (User Preset) - Alpine iDA-X301RR Owner's Manual

3
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
select a setting item, and then press
(e.g. Select POWER IC)
BT:
BT IN
3
AUDIO * :
4 4
USER PRESET * MX *
4
*
USER PRESET
GENERAL:
6
PLAY MODE BEEP *
8
AUX+ NAME * AUX
9
*
D-AUX NAME AUX IN GAIN
PLAY MODE
DISPLAY:
DIMMER SCROLL TYPE
IPOD:
PLAYLISTS ARTISTS
AUDIOBOOKS GENRES
PLAYLISTS
TUNER:
FM LEVEL RDS REGIONAL
13
*
PI SEEK FM LEVEL
3
* If IMPRINT audio processor is connected, you can make more
detailed settings for the audio setting. For details, refer to "IMPRINT
Operation (Optional) (iDA-X303 only)" (page 26).
4
* Displayed only when an external audio processor is connected.
5
* Displayed only when MX is set to ON and an external audio
processor is connected. (or the IMPRINT audio processor is
connected (iDA-X303 only)).
6
* iDA-X303 only.
7
* Displayed only when BT IN is OFF.
8
* The setting can be made only when AUX+/AUX is set to ON.
9
* Displayed only when DIGITAL AUX is set to ON.
10
* Displayed only when AUX+ is set to ON.
11
* Refer to "Receiving RDS Regional (Local) Stations" (page 8).
12
* Refer to "Setting PTY31 (Emergency Broadcast) reception" (page 9).
13
* Refer to "PI SEEK Setting" (page 8).
4
Turn the Double Action encoder (iDA-X303 only)
or Rotary encoder (iDA-X301/iDA-X301RR only) to
change the setting, and then press
(e.g. Select POWER IC ON or POWER IC OFF.)
5
Press and hold for 2 seconds to return to normal
mode.
• Pressing during the procedure will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
/ENTER.
4 5
SUBW * MX LEVEL *
7
INT MUTE * AUX+
8
AUX NAME * DIGITAL AUX
10
*
POWER IC DEMO
TEXT SCROLL DIMMER
ALBUMS PODCASTS
COMPOSERS SONGS
11 12
* ALERT PTY31 *
/ENTER.

Bluetooth Setting

Select BT from the setup main menu in step 2 above.
If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you
can place a hands-free call by a Bluetooth- equipped mobile phone.
Make this setting when the Bluetooth INTERFACE (KCE-400BT) is
connected and the Bluetooth function is used. For details, refer to the
Owner's Manual of the optional Bluetooth INTERFACE (KCE-400BT).
Set ADPT when the Bluetooth INTERFACE (KCE-400BT) is
connected.
• The button can be used only when an optional Bluetooth
INTERFACE (KCE-400BT) is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
• When INT MUTE is set to ON, the Bluetooth setting cannot be made.
When the Bluetooth INTERFACE (KCE-400BT) is connected, set INT
MUTE to OFF. Refer to "Turning Mute Mode On/Off (INT MUTE)"
(page 24).

Setting the Bluetooth Connection

BT IN ADPT / BT IN OFF (Initial Setting)
Audio Setting (Only when external audio
processor is connected)
AUDIO is selected on the setup menu in step 2.

Operating the External Audio Processor (USER PRESET)

PRE-1 (Initial Setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6
Turn the Double Action encoder (iDA-X303 only) or Rotary encoder
(iDA-X301/iDA-X301RR only) to select the desired preset number, and
then press /ENTER.
In normal mode, you can also call up the preset memory of the external
audio processor by pressing and holding "PRESET" for at least 2
seconds. Refer to "Operating the External Audio Processor" on page 22.
• For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.

Turning Media Xpander ON/OFF

OFF (Initial setting) / ON
When the Media Xpander is on, and external audio processor is
connected, you can adjust the Media Xpander level.

Setting the MX Level

NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPhone (iDA-X303 only)/iPod, will be able to reproduce the music
clearly even in cars with a lot of road noise. The initial setting is
different depending on the source.

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF
The adjustment can also be made by pressing and holding IMPRINT*
(iDA-X303 only) or SOUND (iDA-X301/iDA-X301RR only) for at
least 2 seconds. Refer to "Turning Subwoofer ON/OFF" (page 20).
* For iDA-X303, when connecting IMPRINT audio processor, you
can't turn the subwoofer ON or OFF by pressing IMPRINT.
23
-EN