Alpine iDA-X303 Quick Reference Manual page 75

Digital media receiver
Hide thumbs Also See for iDA-X303:
Table of Contents

Advertisement

<JAPANESE CAR>
~n
~+R
Front Frame
USB memory Connection (sold separately)
Connect USB memory
1. Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.
USB memory
This unit
(Id
t Iy)
eronl~~:£m.
Cable (supplied)
SCrews (M5 )( 8)
(Included)
o
Secure the ground lead ofthe unit
to
a clean metal spot using a screw
(*3) already attached to the vehicle's chassis,
This unit
~
mrrA~kcase
2. Connect USB memory to USB cable.
USB memory
(sold separately)
C@-~
iPhone/lPod Connection (sold separately)
Connect USB cable to an iPhone/iPod with Interface cable for
iPod.
USB cable
Interface cable for iPod (supplied)
Remove the iPhone/iPod
Remove the iPhone/iPod from Interface cable for iPod.
o
Remove the iPhoneliPod after the unit has been changed to a source
other than the iPhoneliPod. If the iPhoneliPod is removed while
playing, data may be lost.
o
If sound is not output or the iPhoneliPod is not recognized even when
the iPhoneliPod is connected, remove the iPhoneliPod once, then
connect it again, or reset the iPod.
• Do not leave the iPhoneliPod in a vehicle for a long time. Heat and
humidity may damage the iPhoneliPod and you may not be able
to
play it again.
Remove USB memory
Pull out USB memory squarely from the USB cable.
This unit
USB memory
B~
USB connector
(sold separately)
mool~-
Cable (supplied)
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change
to
a source other than the USB memory mode, then remove
the USB memory.
If
the USB memory is removed in the USB memory
mode, data may be damaged.
o
Route the USB cable away from other cables.
Portable Audio Player Connection (sold separately)
Connecting a Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Disconnect the Portable audio player.
Disconnect the cable supplied with the Portable audio
player from the USB cable.
• Refer also to the Owner's Manual of the Portable audio player.
43-EN

Advertisement

Chapters

Table of Contents
loading

Table of Contents